Job Description
**Job title:**
You have the opportunity to be part of an exciting team and contribute to the design, development and maintenance of Magnetic Resonance Imaging (MRI) systems. In this role of Senior Electrical Engineer, you are responsible for the development and maintenance of MR Hardware Subsystems/Components and will gain substantial knowledge of complex systems in a medical imaging environment. Together with a multidisciplinary team of engineers, you play a crucial role in getting these systems/sub-systems to the required performance, by developing the designs related to electrical, electronics, controls, cabling etc. and looking for the best solutions within those boundaries. This requires broad orientation, conceptual skills and a “can do” mentality, keeping abreast with all trends and advancements in technology and medical imaging.
You are a part of Hardware Engineering Group under MRI Business, located at Philips Healthcare Innovation Centre (HIC) Pune. HIC is playing a key role in Philips global strategy for Diagnostic Imaging. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards healthcare growth markets
**Your role:**
+ Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications
+ Ensuring that the design is consistent with the higher-level architecture and requirements
+ Ensuring that the proposed design would have the safety, reliability and quality features built-in
+ Responsible for ensuring that the design meets the performance, quality and cost criteria
+ Conduct concept and feasibility studies. Leads the introduction of new technologies
+ Ensuring that there is proper documentation per standards for the developed design
+ Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification
+ Ensuring that the design modules meet the product certification requirements
+ Drawing up personal schedule and reports on progress
+ Being abreast of technical developments in own field through study of literature and technical contacts
+ Maintaining product and company reputation by complying with country specific regulations
**You're the right fit if:** (4 x bullets max)
+ Completed engineering studies at University level; BE/BTech/ME/M-Tech in Electronics or Electrical Engineering, with 3 to 6 years of experience
+ Knowledge of state-of-the-art methods/tools (schematics/simulation) used in electrical design, including cable harness
+ Experience in Analog, Mixed Signal Board Design and Power Electronics designs
+ Experience in 16/32-bit microcontroller-based design and interfacing
+ Knowledge of cable harness design, including fiber optic cable
+ Knowledge of communication interfaces like RS232, RS485, CAN, Ethernet and USB
+ Working knowledge of component selection, connector selection and cable selection
+ Knowledge of EMI/EMC standards and testing for conformance
+ Knowledge of RF and Audio/video interface connector/cabling design will be added advantage.
+ Hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics)
+ Knowledge of mechanical design compatibility aspects, including cabling
+ Knowledge of IEC 60601 standards will be an added advantage
+ Knowledge of Embedded Software Programming will be an added advantage
+ Ability to understand and debug problems across hardware/software boundaries
+ Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc.
+ Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent
+ Disciplined team worker, ability to work independently
+ Able to guide and mentor young engineers in the team
+ Result oriented team player
+ Ability to present and articulate ideas to key stakeholders and leadership team
+ Excellent communication skills and Positive ‘can do’ attitude
+ Quality mindset in design and documentation
+ Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage
+ New Product Introduction (NPI) and Product Life Cycle Management
+ Product Obsolescence Management/Sustenance and Value Engineering
**How we work together**
We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week.
Onsite roles require full-time presence in the company’s facilities.
Field roles are most effectively done outside of the company’s main facilities, generally at the customers’ or suppliers’ locations.
Indicate if this role is an office/field/onsite role.
**About Philips**
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
* Learn more about our business.
* Discover our rich and exciting history.
* Learn more about our purpose.
If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our culture of impact with care here.
\#LI-Philips
You have the opportunity to be part of an exciting team and contribute to the design, development and maintenance of Magnetic Resonance Imaging (MRI) systems. In this role of Senior Electrical Engineer, you are responsible for the development and maintenance of MR Hardware Subsystems/Components and will gain substantial knowledge of complex systems in a medical imaging environment. Together with a multidisciplinary team of engineers, you play a crucial role in getting these systems/sub-systems to the required performance, by developing the designs related to electrical, electronics, controls, cabling etc. and looking for the best solutions within those boundaries. This requires broad orientation, conceptual skills and a “can do” mentality, keeping abreast with all trends and advancements in technology and medical imaging.
You are a part of Hardware Engineering Group under MRI Business, located at Philips Healthcare Innovation Centre (HIC) Pune. HIC is playing a key role in Philips global strategy for Diagnostic Imaging. With Philips HIC, the foundation was laid to touch billions of lives and reiterate Philips commitment towards healthcare growth markets
**Your role:**
+ Requirements, design, implementation, test and integration of module/sub-system in accordance with the higher-level architectural requirements and design specifications
+ Ensuring that the design is consistent with the higher-level architecture and requirements
+ Ensuring that the proposed design would have the safety, reliability and quality features built-in
+ Responsible for ensuring that the design meets the performance, quality and cost criteria
+ Conduct concept and feasibility studies. Leads the introduction of new technologies
+ Ensuring that there is proper documentation per standards for the developed design
+ Ensuring the mutual consistency and efficient integration of the separate components in modular design that meets the product specification
+ Ensuring that the design modules meet the product certification requirements
+ Drawing up personal schedule and reports on progress
+ Being abreast of technical developments in own field through study of literature and technical contacts
+ Maintaining product and company reputation by complying with country specific regulations
**You're the right fit if:** (4 x bullets max)
+ Completed engineering studies at University level; BE/BTech/ME/M-Tech in Electronics or Electrical Engineering, with 3 to 6 years of experience
+ Knowledge of state-of-the-art methods/tools (schematics/simulation) used in electrical design, including cable harness
+ Experience in Analog, Mixed Signal Board Design and Power Electronics designs
+ Experience in 16/32-bit microcontroller-based design and interfacing
+ Knowledge of cable harness design, including fiber optic cable
+ Knowledge of communication interfaces like RS232, RS485, CAN, Ethernet and USB
+ Working knowledge of component selection, connector selection and cable selection
+ Knowledge of EMI/EMC standards and testing for conformance
+ Knowledge of RF and Audio/video interface connector/cabling design will be added advantage.
+ Hands-on experience in schematics and PCB design tools (e.g. Cadence / mentor Graphics)
+ Knowledge of mechanical design compatibility aspects, including cabling
+ Knowledge of IEC 60601 standards will be an added advantage
+ Knowledge of Embedded Software Programming will be an added advantage
+ Ability to understand and debug problems across hardware/software boundaries
+ Knowledge of Global Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA etc.
+ Hands-on experience with tools like Agile, Clear-quest, Windchill or equivalent
+ Disciplined team worker, ability to work independently
+ Able to guide and mentor young engineers in the team
+ Result oriented team player
+ Ability to present and articulate ideas to key stakeholders and leadership team
+ Excellent communication skills and Positive ‘can do’ attitude
+ Quality mindset in design and documentation
+ Global and Cross-functional Experience/Skills in a Matrix Organization will be an added advantage
+ New Product Introduction (NPI) and Product Life Cycle Management
+ Product Obsolescence Management/Sustenance and Value Engineering
**How we work together**
We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week.
Onsite roles require full-time presence in the company’s facilities.
Field roles are most effectively done outside of the company’s main facilities, generally at the customers’ or suppliers’ locations.
Indicate if this role is an office/field/onsite role.
**About Philips**
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
* Learn more about our business.
* Discover our rich and exciting history.
* Learn more about our purpose.
If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our culture of impact with care here.
\#LI-Philips
Apply for this Position
Ready to join ? Click the button below to submit your application.
Submit Application